ENGINEERING RESOURCES

Find the source.
Confirm the edition.

Publisher and authority links for project planning, document review and further reading.

RULES & REGULATIONS

Publisher and authority resources

Official sources for the laws, codes and standards relevant to fire safety, electrical, automation and IT work in Bangladesh. These sites belong to their publishers. Always check the current edition and confirm requirements with the authority having jurisdiction.

BNBC link: HBRI publication index for the 2020 edition. Other links lead to publisher or authority portals; they do not identify a single edition. For each project, record the applicable document title, edition, amendments and access date with the responsible reviewer.

GUIDES & CHECKLISTS

Practical checklists
for your project.

Six working checklists and guides for clients, project engineers and facility managers. Ask us for a copy and we will send it by email.

GUIDE 1

Fire Service (FSCD) NOC and fire safety plan guide

Application steps, required architectural and fire drawings, and the document list.

Request a copy ↗

GUIDE 2

Fire and electrical safety audit preparation checklist

How a factory or building prepares before BNBC, FSCD and industrial compliance audits.

Request a copy ↗

GUIDE 3

Fire pump and alarm panel quotation comparison checklist

Compare vendor quotations like-with-like and spot items that are left out.

Request a copy ↗

GUIDE 4

Fire-rated door and hydrant handover checklist

UL/FM hardware, panic bars, seals, pump room interfaces and pressure test checks.

Request a copy ↗

GUIDE 5

BMS, ELV and data centre scoping guide

Rack space, structured cabling, UPS and system interface planning before the project starts.

Request a copy ↗

GUIDE 6

Rooftop solar and utility maintenance checklist

Routine safety and performance checks for industrial solar PV, boiler and compressed air systems.

Request a copy ↗

FAQ

Questions clients
ask most.

Straight answers about how we work, what we deliver and how we support you afterwards.

01

What are the steps to start a project with AnnexB Technologies?

+

We start with a site visit and a first technical assessment. Then we prepare a defined scope, drawings and a bill of quantities, and issue a quotation. After approval, our in-house team handles installation, testing, commissioning and training, and then a full handover.

02

Do you only provide design and consultancy, or also supply and installation?

+

Both. You can take engineering design, audit and consultancy on its own, or a full turnkey solution from design through equipment supply, installation and testing.

03

What help do you give with Fire Service (FSCD) NOC and fire safety plan approval?

+

We prepare fire safety and evacuation drawings in line with BNBC and Fire Service requirements, hydraulic calculations, the technical documents for the application, and the preparation needed for the site inspection.

04

Do you work on compliance audits (BNBC, RSC, Nirapon) and corrective action plans for garments and industrial factories?

+

Yes. We carry out electrical and fire safety audits, thermal scanning, earthing tests and load management checks, and we help factories implement the Corrective Action Plan (CAP) from the audit findings.

05

What information do you need for a quotation, and how long does it take?

+

Send the architectural drawings of the building or floor (CAD or PDF), the building type and total area, and a description of the system you need. We normally issue a detailed technical and commercial proposal within 3 to 5 working days of the site visit.

06

Is the work done by your own team or by subcontractors?

+

Our core work is carried out by our own in-house engineering team: design, audits, system integration, project supervision, and testing and commissioning.

07

Which documents do you hand over at the end of a project?

+

As-built drawings, testing and commissioning reports, equipment certificates and warranty cards, Operation and Maintenance (O&M) manuals, and practical training for your operating team.

08

Do you provide maintenance (AMC) and technical support after handover?

+

Yes. After handover we provide warranty support and, as you need, an annual maintenance contract (AMC), quarterly system testing and emergency technical support.

09

Do you work outside Dhaka?

+

Yes. Besides Dhaka we serve industrial and commercial areas across Bangladesh, including Gazipur, Savar, Narayanganj, Chattogram, Cox’s Bazar and Mymensingh.

YOUR NEXT CHAPTER

Let’s build what’s next.

Discuss your project