Illustration: Industrial rooftop solar in Bangladesh: a guide

SOLAR POWER

Industrial rooftop solar in Bangladesh: a guide

Rooftop solar can lower the power bill of a factory or commercial building. A good result starts with the roof, the electrical connection and the safety design, not only the panel size.

What a rooftop solar plan includes

  • Roof condition, strength, shading and safe access for maintenance
  • System size matched to the daytime load and the available area
  • Inverters, cables, protection and earthing designed for the site
  • Connection to the building supply, and any approvals the utility requires
  • Monitoring so output and faults are visible

Questions to settle before you buy

  1. Has a qualified engineer checked that the roof can carry the system?
  2. How will lightning and surge protection and earthing be handled?
  3. How does the system behave when the grid or the generator is running?
  4. Which equipment warranties apply, and who services the system?
  5. How will the system be cleaned, inspected and tested over its life?

Plan it with the other building systems

Solar depends on the electrical design, fire safety, lightning protection and the building monitoring system. Agree cable routes, isolation points and firefighter access on the drawings before installation.

Test, train and hand over

Ask for commissioning test records, a single-line diagram, as-built drawings, manuals and operator training. A simple routine of cleaning and inspection protects output and safety.

See our solar power service.

Planning something similar?

Tell us about your building and what you need. We reply within 24 hours.

Discuss your project

This is a planning overview. A qualified professional must determine site-specific design and requirements.

YOUR NEXT CHAPTER

Let’s build what’s next.

Discuss your project